From pbarber at fsu.edu  Mon Jul  6 12:09:54 2020
From: pbarber at fsu.edu (Powell Barber)
Date: Mon, 6 Jul 2020 16:09:54 +0000
Subject: [gammanoles] Bad news...
Message-ID: <5D59C443-053D-4DEC-BE78-FE0D68A5E36B@fsu.edu>

All -

I am saddened to report that the GMX detector anneal lab is down.  The turbo is in failure mode on start.  I will be investigating options and will report soonest.

few cheers,

p.


From pbarber at fsu.edu  Wed Jul  8 13:06:36 2020
From: pbarber at fsu.edu (Powell Barber)
Date: Wed, 8 Jul 2020 17:06:36 +0000
Subject: [gammanoles] Anneal lab operations...
Message-ID: <76A0AE5E-8946-459D-9429-48B48B4F1916@fsu.edu>

All -

The Varian V70 turbo, stolen from the SPS, is not installed on our Anneal Lab architecture.  The system was placed on the turbo about noon today and was pulling mid E-5 Torr within a few minutes.  I intend to allow it to pump overnight to determine the system?s base pressure on this turbo.  I?ll report same to you tomorrow and we can determine whether you?re happy enough for us to proceed.

cheers,

p.



From tripathi.vandana at gmail.com  Wed Jul  8 13:16:08 2020
From: tripathi.vandana at gmail.com (Vandana Tripathi)
Date: Wed, 8 Jul 2020 13:16:08 -0400
Subject: [gammanoles] Anneal lab operations...
In-Reply-To: <76A0AE5E-8946-459D-9429-48B48B4F1916@fsu.edu>
References: <76A0AE5E-8946-459D-9429-48B48B4F1916@fsu.edu>
Message-ID: <CAF-8sM4qRubJTYc79YPTVQZ4YMKVi2adn2FhqchUPt0e86DYXQ@mail.gmail.com>

?


*Dr. Vandana Tripathi*

*Assistant Professor*

*Dept. of Physics*

*Florida State University*
*Tallahassee, Fl 32306*


On Wed, Jul 8, 2020 at 1:06 PM Powell Barber via Gammanoles <
gammanoles at lists.fsu.edu> wrote:

> All -
>
> The Varian V70 turbo, stolen from the SPS, is not installed on our Anneal
> Lab architecture.  The system was placed on the turbo about noon today and
> was pulling mid E-5 Torr within a few minutes.  I intend to allow it to
> pump overnight to determine the system?s base pressure on this turbo.  I?ll
> report same to you tomorrow and we can determine whether you?re happy
> enough for us to proceed.
>
> cheers,
>
> p.
>
> _______________________________________________
> Gammanoles mailing list
> Gammanoles at lists.fsu.edu
> https://lists.fsu.edu/mailman/listinfo/gammanoles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fsu.edu/pipermail/gammanoles/attachments/20200708/44c77483/attachment.html>

From pbarber at fsu.edu  Thu Jul  9 09:41:17 2020
From: pbarber at fsu.edu (Powell Barber)
Date: Thu, 9 Jul 2020 13:41:17 +0000
Subject: [gammanoles] Anneal lab vacuum good to go.
Message-ID: <E42A2B3F-0EB6-4E0E-B91B-2AE040697930@fsu.edu>

Can proceed at will.

cheers,

p.



From cbb17e at my.fsu.edu  Fri Jul 10 09:27:44 2020
From: cbb17e at my.fsu.edu (Caleb Benetti)
Date: Fri, 10 Jul 2020 13:27:44 +0000
Subject: [gammanoles] Anneal lab vacuum good to go.
In-Reply-To: <E42A2B3F-0EB6-4E0E-B91B-2AE040697930@fsu.edu>
References: <E42A2B3F-0EB6-4E0E-B91B-2AE040697930@fsu.edu>
Message-ID: <BN7PR05MB44208D33F408865AB1C1EC67FA650@BN7PR05MB4420.namprd05.prod.outlook.com>

Clover 1 and 2 are in the anneal room ready to go.

-Caleb
________________________________
From: Gammanoles <gammanoles-bounces at lists.fsu.edu> on behalf of Powell Barber via Gammanoles <gammanoles at lists.fsu.edu>
Sent: Thursday, July 9, 2020 9:41 AM
To: FSU Physis Gamma Ray Spectrocopy Group <gammanoles at lists.fsu.edu>
Cc: Powell Barber <pbarber at fsu.edu>
Subject: [gammanoles] Anneal lab vacuum good to go.

Can proceed at will.

cheers,

p.

_______________________________________________
Gammanoles mailing list
Gammanoles at lists.fsu.edu
https://lists.fsu.edu/mailman/listinfo/gammanoles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fsu.edu/pipermail/gammanoles/attachments/20200710/6ea75972/attachment.html>

From pbarber at fsu.edu  Tue Jul 21 12:04:38 2020
From: pbarber at fsu.edu (Powell Barber)
Date: Tue, 21 Jul 2020 16:04:38 +0000
Subject: [gammanoles] Proper screws for Clover Mounting Flanges
Message-ID: <BFDC16CD-8CA1-4D48-B214-FB245E55965A@fsu.edu>

All -

While working on the clovers this go-round, I noted that some of the screws that were being used to mount the garnet, anodized-aluminum mounting flanges to the clovers were not correct.  Some were far too short, leaving only a few threads engaged, while others were not the correct thread.  As I understand it, these are used to structurally support the detectors, so it?s important to get these right.

The correct screw thread for these holes is a metric M5-0.8 (course) thread.  Unfortunately, this is so close to the U.S. size #6-32, that these can easily be substituted without one realizing it.  The #6-32 are smaller in diameter by about .010? and thus provide less thread engagement.

I will be replacing all of these and marking the dewars before they are sent back down.  Additionally, there is a plastic drawer in the Anneal lab with these screws clearly marked should you ever need to replace them.  THIS IS NOT A SIZE THAT THE SHOP ROUTINELY STOCKS, so if you need one, get it from the anneal lab.

Once again, the correct screw is an M5-0.8 x 14mm.

cheers,

p.



From stabor at fsu.edu  Tue Jul 21 12:06:24 2020
From: stabor at fsu.edu (Samuel Tabor)
Date: Tue, 21 Jul 2020 16:06:24 +0000
Subject: [gammanoles] Proper screws for Clover Mounting Flanges
In-Reply-To: <BFDC16CD-8CA1-4D48-B214-FB245E55965A@fsu.edu>
References: <BFDC16CD-8CA1-4D48-B214-FB245E55965A@fsu.edu>
Message-ID: <BL0PR02MB553986F382B5C0D55C7D3A6FD9780@BL0PR02MB5539.namprd02.prod.outlook.com>

Thanks, Powell.
Sam
________________________________
From: Gammanoles <gammanoles-bounces at lists.fsu.edu> on behalf of Powell Barber via Gammanoles <gammanoles at lists.fsu.edu>
Sent: Tuesday, July 21, 2020 12:04 PM
To: FSU Physis Gamma Ray Spectrocopy Group <gammanoles at lists.fsu.edu>
Cc: Powell Barber <pbarber at fsu.edu>
Subject: [gammanoles] Proper screws for Clover Mounting Flanges

All -

While working on the clovers this go-round, I noted that some of the screws that were being used to mount the garnet, anodized-aluminum mounting flanges to the clovers were not correct.  Some were far too short, leaving only a few threads engaged, while others were not the correct thread.  As I understand it, these are used to structurally support the detectors, so it?s important to get these right.

The correct screw thread for these holes is a metric M5-0.8 (course) thread.  Unfortunately, this is so close to the U.S. size #6-32, that these can easily be substituted without one realizing it.  The #6-32 are smaller in diameter by about .010? and thus provide less thread engagement.

I will be replacing all of these and marking the dewars before they are sent back down.  Additionally, there is a plastic drawer in the Anneal lab with these screws clearly marked should you ever need to replace them.  THIS IS NOT A SIZE THAT THE SHOP ROUTINELY STOCKS, so if you need one, get it from the anneal lab.

Once again, the correct screw is an M5-0.8 x 14mm.

cheers,

p.

_______________________________________________
Gammanoles mailing list
Gammanoles at lists.fsu.edu
https://lists.fsu.edu/mailman/listinfo/gammanoles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fsu.edu/pipermail/gammanoles/attachments/20200721/00bd1afe/attachment.html>

From vtripath at fsu.edu  Tue Jul 21 12:12:31 2020
From: vtripath at fsu.edu (Vandana Tripathi)
Date: Tue, 21 Jul 2020 16:12:31 +0000
Subject: [gammanoles] Proper screws for Clover Mounting Flanges
In-Reply-To: <BFDC16CD-8CA1-4D48-B214-FB245E55965A@fsu.edu>
References: <BFDC16CD-8CA1-4D48-B214-FB245E55965A@fsu.edu>
Message-ID: <BL0PR02MB539640C27F4C8CB93E540747D4780@BL0PR02MB5396.namprd02.prod.outlook.com>

thanks Powell for the love and care to the our detectors !!!?
________________________________
From: Gammanoles <gammanoles-bounces at lists.fsu.edu> on behalf of Powell Barber via Gammanoles <gammanoles at lists.fsu.edu>
Sent: Tuesday, July 21, 2020 12:04 PM
To: FSU Physis Gamma Ray Spectrocopy Group <gammanoles at lists.fsu.edu>
Cc: Powell Barber <pbarber at fsu.edu>
Subject: [gammanoles] Proper screws for Clover Mounting Flanges

All -

While working on the clovers this go-round, I noted that some of the screws that were being used to mount the garnet, anodized-aluminum mounting flanges to the clovers were not correct.  Some were far too short, leaving only a few threads engaged, while others were not the correct thread.  As I understand it, these are used to structurally support the detectors, so it?s important to get these right.

The correct screw thread for these holes is a metric M5-0.8 (course) thread.  Unfortunately, this is so close to the U.S. size #6-32, that these can easily be substituted without one realizing it.  The #6-32 are smaller in diameter by about .010? and thus provide less thread engagement.

I will be replacing all of these and marking the dewars before they are sent back down.  Additionally, there is a plastic drawer in the Anneal lab with these screws clearly marked should you ever need to replace them.  THIS IS NOT A SIZE THAT THE SHOP ROUTINELY STOCKS, so if you need one, get it from the anneal lab.

Once again, the correct screw is an M5-0.8 x 14mm.

cheers,

p.

_______________________________________________
Gammanoles mailing list
Gammanoles at lists.fsu.edu
https://lists.fsu.edu/mailman/listinfo/gammanoles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fsu.edu/pipermail/gammanoles/attachments/20200721/9ce4f8f1/attachment.html>

From pbarber at fsu.edu  Tue Jul 21 12:27:26 2020
From: pbarber at fsu.edu (Powell Barber)
Date: Tue, 21 Jul 2020 16:27:26 +0000
Subject: [gammanoles] Admin stuff - keeping your email current...
Message-ID: <EBD8D60E-C427-4C5D-B1BA-2AF663785675@fsu.edu>

All -

The mailing list won?t allow posts from emails other than the one you signed up with.  With the demise of *.nucmar.physics.fsu.edu<http://nucmar.physics.fsu.edu> and *.physics.fsu.edu<http://physics.fsu.edu> e-mail addresses as ?real? addresses, this means that while you are able to receive mailing list e-mails via deprecated but forwarded email addresses, you can not send from your new address.

You can change your subscription parameters from the following page:

https://lists.fsu.edu/mailman/listinfo/gammanoles

or just send me your new and old e-mail address and I?ll do it for you.

cheers,

p.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fsu.edu/pipermail/gammanoles/attachments/20200721/94c30771/attachment.html>